Power station · ALLPOWERS

ALLPOWERS R1500

The ALLPOWERS R1500 stores 1,152 Wh and delivers 1,800 W continuous through its inverter. It accepts up to 650 W of solar via XT60. Of 11 checked solar panels, 5 fit directly and 0 with an adapter cable.

At a glance

Covers the first 24 hours: CPAP overnight
Not enough: Home blackout (only 12.5 of 24 hrs of use), Camping with cooler (only 16.5 of 24 hrs of use), Working from home (only 8.7 of 16 hrs of use), Job site (only 0.6 of 2.5 hrs of use), Fridge only (only 15.3 of 24 hrs of use)

Calculated with the simulator's starter profiles, no sun and no recharging. Calculate with your devices and solar: runtime simulator → · Details under “Runtime”

Key figures

Capacity: 1,152 Wh^{[1, 2, 3, 4]}
Cell chemistry: LFP (lithium iron phosphate)^[4]
Inverter continuous output: 1,800 W^[4]
Surge output: 3,000 W^[4]
Idle draw, AC on, no load: not sourced
Total solar input, max.: 650 W^{[1, 2, 3, 4]}
Weight: 16.7 kg^[5]
Dimensions L × W × H: 41.3 × 31.2 × 26.5 cm^[5]
AC charging (120 V): 800 W^[4]
Warranty (years): 5^[6]
Charge cycles: 3,500^[6]
AC outlets: 4^[6]
USB-C: 2 × up to 100 W^[6]
USB-A: 2^[6]
12 V outputs: 1^[6]

Note: US AC charging derived from 6.8 A at 120 V^[4]

Solar input

Ports (XT60): 1^{[1, 2, 3]}
MPPT voltage range: 12–60 V^{[1, 2, 3]}
Open-circuit voltage (Voc) max.: 60 V^{[1, 2, 3]}
Input current max.: 13 A^{[1, 2, 3]}
Solar power max.: 650 W^{[1, 2, 3]}

Restrictions per source

Manual: output voltage within 60V, max 13A, 650W.

Connector per source: XT60 (MC4-to-XT60 cable included)

Runtime for typical uses

Calculated like the runtime simulator: typical scenario, no sun, full battery. Idle draw 18 W (estimate). Bars up to 72 hours.

Compatible solar panels

11 solar panels, each checked against this station's limits. Open-circuit voltage is multiplied by a cold factor of 1.10. How the check works

Fits directly 5
With adapter 0
Special wiring 1
Unclear 5
Doesn't fit 0

Solar panels on the XT60 input, sorted by status
Solar panel	Status	Connection	Quantity	Cold margin
EcoFlow 400W Portable Solar Panel · 400 W	Fits directly	MC4 XT60 (cable included with station)	up to 1	sufficient
EcoFlow NextGen 220W Bifacial Portable Solar Panel · 220 W	Fits directly	MC4 XT60 (cable included with station)	up to 2	sufficient
BLUETTI PV200 · 200 W	Fits directly	MC4 XT60 (cable included with station)	up to 2	sufficient
EcoFlow 110W Portable Solar Panel · 110 W	Fits directly	MC4 XT60 (cable included with station)	up to 4	sufficient
Renogy 100W 12V Flexible Monocrystalline · 100 W	Fits directly	MC4 XT60 (cable included with station)	up to 4	sufficient
Jackery SolarSaga 200W (JS-200D) · 200 W	Special wiring	DC8020 MC4 or DC8020 XT60 third-party adapter	up to 2	sufficient
LONGi Hi-MO 6 LR5-54HTH-430M · 430 W	Unclear	MC4 XT60 (cable included with station)	up to 1	sufficient
Anker SOLIX PS400 (A2437) · 400 W	Unclear	MC4 XT60 (cable included with station)	up to 1	below 10%
Anker 531 Solar Panel 200W · 200 W	Unclear	XT60 (panel) XT60 input	up to 1	can't be checked
Goal Zero Nomad 200 · 200 W	Unclear	Anderson Powerpole (HPP) XT60 third-party adapter	up to 1	sufficient
Jackery SolarSaga 100 Air · 100 W	Unclear	–	up to 3	sufficient

Check notes per panel

EcoFlow 400W Portable Solar Panel

Voc 48V x1 = 48.0V; cold-adjusted 52.8V <= 60V. Isc 11A <= 13A (allows 1 string(s) in parallel per port).

Max per port: 1 in series x 1 parallel string(s); ports: 1.