Power station · Anker SOLIX

Anker SOLIX F2000 (PowerHouse 767)

The Anker SOLIX F2000 (PowerHouse 767) stores 2,048 Wh and delivers 2,400 W continuous through its inverter. It accepts up to 1,000 W of solar via XT60. Of 11 checked solar panels, 2 fit directly and 6 with an adapter cable.

At a glance

  • Covers the first 24 hours: Camping with cooler, Working from home, CPAP overnight, Fridge only
  • Not enough: Home blackout (only 21.4 of 24 hrs of use), Job site (only 1.1 of 2.5 hrs of use)

Calculated with the simulator's starter profiles, no sun and no recharging. Calculate with your devices and solar: runtime simulator → · Details under “Runtime”

Key figures

Capacity
2,048 Wh[1, 2, 5]
Cell chemistry
LFP (lithium iron phosphate)[4, 5]
Inverter continuous output
2,400 W[4]
Surge output
4,000 W[4]
Idle draw, AC on, no load
not sourced
Total solar input, max.
1,000 W[1, 2, 5]
Weight
30.5 kg[6]
Dimensions L × W × H
52.5 × 39.5 × 25 cm[6]
AC charging (120 V)
1,800 W[4]
Warranty (years)
5[6]
Charge cycles
3,000 to 80%[6]
AC outlets
4[6]
USB-C
3 × up to 100 W[6]
USB-A
2[6]
12 V outputs
2[6]

Note: Discontinued model; 2800 W peak only on the Australian manufacturer page (230 V)[3, 5]

Solar input

Ports (XT60)
1[1, 2]
MPPT voltage range
11–60 V[1, 2]
Open-circuit voltage (Voc) max.
60 V[1, 2]
Input current max.
20 A[1, 2]
Input current at low voltage
10 A[1, 2]
Solar power max.
1,000 W[1, 2]
Restrictions per source

11-32V: 10A; 32-60V: 20A; 1000W (user manual).

Connector per source: XT-60 (number of solar ports not confirmed in reviewed manual text; treated as 1)

Runtime for typical uses

Calculated like the runtime simulator: typical scenario, no sun, full battery. Idle draw 24 W (estimate). Bars up to 72 hours.

Compatible solar panels

11 solar panels, each checked against this station's limits. Open-circuit voltage is multiplied by a cold factor of 1.10. How the check works

  • Fits directly 2
  • With adapter 6
  • Special wiring 2
  • Unclear 1
  • Doesn't fit 0
Solar panels on the XT60 input, sorted by status
Solar panelStatusConnectionQuantityCold margin
Anker SOLIX PS400 (A2437) · 400 Wrecommended by manufacturerFits directly
  1. MC4
  2. XT60 (cable included with panel)
up to 2below 10%
Anker 531 Solar Panel 200W · 200 Wrecommended by manufacturerFits directly
  1. XT60 (panel)
  2. XT60 input
up to 5can't be checked
LONGi Hi-MO 6 LR5-54HTH-430M · 430 WWith adapter
  1. MC4
  2. XT60 adapter cable (sold separately)
up to 1sufficient
EcoFlow 400W Portable Solar Panel · 400 WWith adapter
  1. MC4
  2. XT60 adapter cable (sold separately)
up to 1sufficient
EcoFlow NextGen 220W Bifacial Portable Solar Panel · 220 WWith adapter
  1. MC4
  2. XT60 adapter cable (sold separately)
up to 2sufficient
BLUETTI PV200 · 200 WWith adapter
  1. MC4
  2. XT60 adapter cable (sold separately)
up to 2sufficient
EcoFlow 110W Portable Solar Panel · 110 WWith adapter
  1. MC4
  2. XT60 adapter cable (sold separately)
up to 2sufficient
Renogy 100W 12V Flexible Monocrystalline · 100 WWith adapter
  1. MC4
  2. XT60 adapter cable (sold separately)
up to 2sufficient
Goal Zero Nomad 200 · 200 WSpecial wiring
  1. Anderson Powerpole (HPP)
  2. XT60 third-party adapter
up to 2sufficient
Jackery SolarSaga 200W (JS-200D) · 200 WSpecial wiring
  1. DC8020
  2. MC4
or
  1. DC8020
  2. XT60 third-party adapter
up to 2sufficient
Jackery SolarSaga 100 Air · 100 WUnclear–up to 2sufficient
Check notes per panel
Anker SOLIX PS400 (A2437)

STC Voc 57.6V is within 60V but cold-adjusted 63.4V exceeds it (<10% headroom). Manufacturer-recommended pairing -> allowed with cold-weather warning. Isc 8.75A <= 20A (allows 2 string(s) in parallel per port).

Max per port: 1 in series x 2 parallel string(s); ports: 1.

support.ankersolix.com/s/article/Anker-SOLIX-F2… · device.report/manuals/anker-solix-f2000-power-s… · service.ankersolix.com/product-description/a085… · ankersolix.com/products/400w-portable-solar-pan…

Anker 531 Solar Panel 200W

Voc not published; pairing explicitly recommended by manufacturer. Imp (Isc unpublished) 4.17A <= 20A (allows 4 string(s) in parallel per port). Isc unpublished; parallel count uses Imp and is optimistic. Manufacturer documents up to 5 of these panels on this station.

Manufacturer-documented: up to 5 panels in parallel (MC4 branch connector) into the single input; input current is capped by the station.

support.ankersolix.com/s/article/Anker-SOLIX-F2… · device.report/manuals/anker-solix-f2000-power-s… · ankersolix.com/ca/products/a24321a1-free

LONGi Hi-MO 6 LR5-54HTH-430M

Voc 39.13V x1 = 39.1V; cold-adjusted 43.0V <= 60V. Isc 14.15A <= 20A (allows 1 string(s) in parallel per port).

Max per port: 1 in series x 1 parallel string(s); ports: 1.

support.ankersolix.com/s/article/Anker-SOLIX-F2… · device.report/manuals/anker-solix-f2000-power-s…

EcoFlow 400W Portable Solar Panel

Voc 48V x1 = 48.0V; cold-adjusted 52.8V <= 60V. Isc 11A <= 20A (allows 1 string(s) in parallel per port).

Max per port: 1 in series x 1 parallel string(s); ports: 1.

support.ankersolix.com/s/article/Anker-SOLIX-F2… · device.report/manuals/anker-solix-f2000-power-s… · us.ecoflow.com/products/400w-portable-solar-pan…

EcoFlow NextGen 220W Bifacial Portable Solar Panel

Voc 21.5V x1 = 21.5V; cold-adjusted 23.7V <= 60V. Isc 12.4A > 10A; station caps input current (Anker manual: five 531 panels (5x4.17A Imp) on the 20A input). Output clipped to ~368W.

Max per port: 2 in series x 1 parallel string(s); ports: 1. Below 32V the input current limit is 10A. Panel's included XT60i cable is not confirmed to mate with this XT60 port; use a plain MC4-to-XT60 cable.

support.ankersolix.com/s/article/Anker-SOLIX-F2… · device.report/manuals/anker-solix-f2000-power-s… · ca.ecoflow.com/products/220w-bifacial-portable-…

BLUETTI PV200

Voc 26.1V x1 = 26.1V; cold-adjusted 28.7V <= 60V. Isc 10.3A > 10A; station caps input current (Anker manual: five 531 panels (5x4.17A Imp) on the 20A input). Output clipped to ~410W.

Max per port: 2 in series x 1 parallel string(s); ports: 1. Below 32V the input current limit is 10A.

support.ankersolix.com/s/article/Anker-SOLIX-F2… · device.report/manuals/anker-solix-f2000-power-s… · bluetti.com/wp-content/uploads/2024/07/PV200-Us… · bluettipower.eu/products/bluetti-sp200

EcoFlow 110W Portable Solar Panel

Voc 21.8V x1 = 21.8V; cold-adjusted 24.0V <= 60V. Isc 6.5A <= 10A (allows 1 string(s) in parallel per port).

Max per port: 2 in series x 1 parallel string(s); ports: 1. Below 32V the input current limit is 10A.

support.ankersolix.com/s/article/Anker-SOLIX-F2… · device.report/manuals/anker-solix-f2000-power-s… · us.ecoflow.com/products/110w-portable-solar-pan…

Renogy 100W 12V Flexible Monocrystalline

Voc 24.4V x1 = 24.4V; cold-adjusted 26.8V <= 60V. Isc 5.16A <= 10A (allows 1 string(s) in parallel per port).

Max per port: 2 in series x 1 parallel string(s); ports: 1. Below 32V the input current limit is 10A.

support.ankersolix.com/s/article/Anker-SOLIX-F2… · device.report/manuals/anker-solix-f2000-power-s… · renogy.com/100-watt-12-volt-flexible-monocrysta…

Goal Zero Nomad 200

Voc 23.0V x1 = 23.0V; cold-adjusted 25.3V <= 60V. port-rated current bound 14A > 10A; station caps input current (Anker manual: five 531 panels (5x4.17A Imp) on the 20A input). Output clipped to ~382W.

Max per port: 2 in series x 1 parallel string(s); ports: 1. Below 32V the input current limit is 10A. Not manufacturer-documented; verify polarity.

support.ankersolix.com/s/article/Anker-SOLIX-F2… · device.report/manuals/anker-solix-f2000-power-s… · goalzero.eu/en/product/goal-zero-nomad-200

Jackery SolarSaga 200W (JS-200D)

Voc 24.8V x1 = 24.8V; cold-adjusted 27.3V <= 60V. Isc 11.2A > 10A; station caps input current (Anker manual: five 531 panels (5x4.17A Imp) on the 20A input). Output clipped to ~400W.

Max per port: 2 in series x 1 parallel string(s); ports: 1. Below 32V the input current limit is 10A. Not manufacturer-documented; verify polarity with a multimeter before connecting.

support.ankersolix.com/s/article/Anker-SOLIX-F2… · device.report/manuals/anker-solix-f2000-power-s… · manualslib.com/manual/3478346/Jackery-Solarsaga… · jackery.com/products/solarsaga-200w-solar-panel

Jackery SolarSaga 100 Air

Voc 29.7V x1 = 29.7V; cold-adjusted 32.7V <= 60V. Isc 4.1A <= 10A (allows 2 string(s) in parallel per port).

Max per port: 1 in series x 2 parallel string(s); ports: 1. Below 32V the input current limit is 10A. Panel connector type not confirmed in sources; connector chain cannot be validated.

support.ankersolix.com/s/article/Anker-SOLIX-F2… · device.report/manuals/anker-solix-f2000-power-s… · jackery.com/products/jackery-explorer-1000-plus…

Keep going with this station

Sources

Manufacturer pages and manuals take priority. Retailer listings appear only where no manufacturer source exists.

  1. Manufacturer support.ankersolix.com/s/article/Anker-SOLIX-F2000-Portable-Pow…
  2. Manufacturer manual, third-party host device.report/manuals/anker-solix-f2000-power-station-user-guide
  3. Manufacturer ankersolix.com/au/products/f2000-100w-portable-solar-panel-1
  4. Manufacturer ankersolix.com/products/f2000
  5. Manufacturer ankersolix.com/de/a1780
  6. Manufacturer ankersolix.com/f2000

Checked on