Power station · BLUETTI

BLUETTI EB3A

The BLUETTI EB3A stores 268.8 Wh and delivers 600 W continuous through its inverter. It accepts up to 200 W of solar via DC7909. Of 11 checked solar panels, 4 fit directly and 0 with an adapter cable.

At a glance

Not enough: Home blackout (only 3.3 of 24 hrs of use), Camping with cooler (only 3.4 of 24 hrs of use), Working from home (only 2.8 of 16 hrs of use), CPAP overnight (only 5.2 of 8 hrs of use), Job site (too weak), Fridge only (only 4.1 of 24 hrs of use)

Calculated with the simulator's starter profiles, no sun and no recharging. Calculate with your devices and solar: runtime simulator → · Details under “Runtime”

Key figures

Capacity: 268.8 Wh^{[1, 2]}
Cell chemistry: LFP (lithium iron phosphate)^[3]
Inverter continuous output: 600 W^[3]
Surge output: 1,200 W^[3]
Idle draw, AC on, no load: not sourced
Total solar input, max.: 200 W^{[1, 2, 3]}
Weight: 4.6 kg^[2]
Dimensions L × W × H: 25.5 × 18 × 18.3 cm^[2]
AC charging (120 V): 350 W^[3]
Warranty (years): 2^[2]
Charge cycles: 2,500 to 80%^[2]
AC outlets: 2^[2]
USB-C: 1 × up to 100 W^[2]
USB-A: 2^[2]
12 V outputs: 1^[2]

Note: ECO mode switches AC off after 4 h below 10 W^[3]

Solar input

Ports (DC7909): 1^{[1, 2]}
MPPT voltage range: ≥ 12 V
Open-circuit voltage (Voc) max.: 28 V^{[1, 2]}
Input current max.: 8.5 A^{[1, 2]}
Solar power max.: 200 W^{[1, 2]}

Restrictions per source

Bluetti specifies an open-circuit-voltage window of 12-28V (not an MPPT window).

Connector per source: DC7909 (MC4-to-DC7909 solar cable included)

Runtime for typical uses

Calculated like the runtime simulator: typical scenario, no sun, full battery. Idle draw 10 W (estimate). Bars up to 72 hours.

Compatible solar panels

11 solar panels, each checked against this station's limits. Open-circuit voltage is multiplied by a cold factor of 1.10. How the check works

Fits directly 4
With adapter 0
Special wiring 2
Unclear 0
Doesn't fit 5

Solar panels on the DC7909 input, sorted by status
Solar panel	Status	Connection	Quantity	Cold margin
EcoFlow NextGen 220W Bifacial Portable Solar Panel · 220 W	Fits directly	MC4 DC7909 BLUETTI solar cable (included)	up to 1	sufficient
BLUETTI PV200 · 200 Wrecommended by manufacturer	Fits directly	MC4 DC7909 BLUETTI solar cable (included)	up to 1	below 10%
EcoFlow 110W Portable Solar Panel · 110 W	Fits directly	MC4 DC7909 BLUETTI solar cable (included)	up to 1	sufficient
Renogy 100W 12V Flexible Monocrystalline · 100 W	Fits directly	MC4 DC7909 BLUETTI solar cable (included)	up to 1	sufficient
Goal Zero Nomad 200 · 200 W	Special wiring	HPP MC4 third-party adapter BLUETTI MC4 solar cable	up to 1	sufficient
Jackery SolarSaga 200W (JS-200D) · 200 W	Special wiring	DC8020 Jackery DC8020 DC7909 adapter BLUETTI DC7909 input	up to 1	sufficient
LONGi Hi-MO 6 LR5-54HTH-430M · 430 W	Doesn't fit	–	–	–
Anker SOLIX PS400 (A2437) · 400 W	Doesn't fit	–	–	–
EcoFlow 400W Portable Solar Panel · 400 W	Doesn't fit	–	–	–
Anker 531 Solar Panel 200W · 200 W	Doesn't fit	–	–	–
Jackery SolarSaga 100 Air · 100 W	Doesn't fit	–	–	–

Check notes per panel

EcoFlow NextGen 220W Bifacial Portable Solar Panel

Voc 21.5V x1 = 21.5V; cold-adjusted 23.7V <= 28V. Isc 12.4A > 8.5A; station caps input current (BLUETTI recommends its PV200 (Isc 10.3A) for the 8.5A EB3A input). Output clipped to ~156W.

Max per port: 1 in series x 1 parallel string(s); ports: 1. Panel rating 220W exceeds per-port limit 200W; input is clipped.

s4.bluettipower.com/bluetti_lgf/support/2025/07… · bluettipower.com/products/bluetti-eb3a-portable… · ca.ecoflow.com/products/220w-bifacial-portable-…

BLUETTI PV200

STC Voc 26.1V is within 28V but cold-adjusted 28.7V exceeds it (<10% headroom). Manufacturer-recommended pairing -> allowed with cold-weather warning. Isc 10.3A > 8.5A; station caps input current (manufacturer pairing). Output clipped to ~174W.

Max per port: 1 in series x 1 parallel string(s); ports: 1.

s4.bluettipower.com/bluetti_lgf/support/2025/07… · bluettipower.com/products/bluetti-eb3a-portable… · bluetti.com/wp-content/uploads/2024/07/PV200-Us… · bluettipower.eu/products/bluetti-sp200

EcoFlow 110W Portable Solar Panel

Voc 21.8V x1 = 21.8V; cold-adjusted 24.0V <= 28V. Isc 6.5A <= 8.5A (allows 1 string(s) in parallel per port).

Max per port: 1 in series x 1 parallel string(s); ports: 1.

s4.bluettipower.com/bluetti_lgf/support/2025/07… · bluettipower.com/products/bluetti-eb3a-portable… · us.ecoflow.com/products/110w-portable-solar-pan…

Renogy 100W 12V Flexible Monocrystalline

Voc 24.4V x1 = 24.4V; cold-adjusted 26.8V <= 28V. Isc 5.16A <= 8.5A (allows 1 string(s) in parallel per port).

Max per port: 1 in series x 1 parallel string(s); ports: 1.

s4.bluettipower.com/bluetti_lgf/support/2025/07… · bluettipower.com/products/bluetti-eb3a-portable… · renogy.com/100-watt-12-volt-flexible-monocrysta…

Goal Zero Nomad 200

Voc 23.0V x1 = 23.0V; cold-adjusted 25.3V <= 28V. port-rated current bound 14A > 8.5A; station caps input current (BLUETTI recommends its PV200 (Isc 10.3A) for the 8.5A EB3A input). Output clipped to ~162W.

Max per port: 1 in series x 1 parallel string(s); ports: 1. Not manufacturer-documented; verify polarity.

s4.bluettipower.com/bluetti_lgf/support/2025/07… · bluettipower.com/products/bluetti-eb3a-portable… · goalzero.eu/en/product/goal-zero-nomad-200

Jackery SolarSaga 200W (JS-200D)

Voc 24.8V x1 = 24.8V; cold-adjusted 27.3V <= 28V. Isc 11.2A > 8.5A; station caps input current (BLUETTI recommends its PV200 (Isc 10.3A) for the 8.5A EB3A input). Output clipped to ~170W.

Max per port: 1 in series x 1 parallel string(s); ports: 1. Cross-brand DC7909 pinout/polarity not confirmed by either maker; prefer DC8020->MC4 + BLUETTI MC4 cable and verify polarity.

s4.bluettipower.com/bluetti_lgf/support/2025/07… · bluettipower.com/products/bluetti-eb3a-portable… · manualslib.com/manual/3478346/Jackery-Solarsaga… · jackery.com/products/solarsaga-200w-solar-panel

LONGi Hi-MO 6 LR5-54HTH-430M