Power station · DJI

DJI Power 1000

The DJI Power 1000 stores 1,024 Wh and delivers 2,200 W continuous through its inverter. It accepts up to 800 W of solar via XT60 on DJI MPPT module. Of 11 checked solar panels, 0 fit directly and 0 with an adapter cable.

At a glance

  • Covers the first 24 hours: CPAP overnight
  • Not enough: Home blackout (only 11.4 of 24 hrs of use), Camping with cooler (only 12.8 of 24 hrs of use), Working from home (only 7.9 of 16 hrs of use), Job site (only 0.6 of 2.5 hrs of use), Fridge only (only 14 of 24 hrs of use)

Calculated with the simulator's starter profiles, no sun and no recharging. Calculate with your devices and solar: runtime simulator → · Details under “Runtime”

Key figures

Capacity
1,024 Wh[1, 2]
Cell chemistry
LFP (lithium iron phosphate)[4]
Inverter continuous output
2,200 W[4]
Surge output
4,400 W[4]
Idle draw, AC on, no load
not sourced
Total solar input, max.
800 W[1, 2]
Weight
13 kg[4]
Dimensions L × W × H
44.8 × 22.5 × 23 cm[4]
AC charging (120 V)
1,200 W[4]
Warranty (years)
3+2[4]
Charge cycles
4,000 to 70%[4]
AC outlets
2[4]
USB-C
2 × up to 140 W[4]
USB-A
2[4]
12 V outputs
0[4]

Note: Solar only with the separate MPPT adapter; AC charging 1200 W (2200 W only in bypass mode); 2600 W for 30 s[3, 4]

Solar input

Ports (XT60 on DJI MPPT module)
2[1, 2]
MPPT voltage range
12–30 V[1, 2]
Open-circuit voltage (Voc) max.
30 V[1, 2]
Input current max.
10 A[1, 2]
Solar power max.
800 W (per port 400 W)[1, 2]
Restrictions per source

Per manual/FAQ: Voc < 30V, each panel < 10A, <= 200W per XT60, <= 400W per module, parallel only (no series), max 3 panels per module, max 2 modules. Module sold separately.

Connector per source: No native PV port: DJI Power Solar Panel Adapter Module (MPPT, 3x XT60 in) -> SDC

Runtime for typical uses

Calculated like the runtime simulator: typical scenario, no sun, full battery. Idle draw 16 W (estimate). Bars up to 72 hours.

Compatible solar panels

11 solar panels, each checked against this station's limits. Open-circuit voltage is multiplied by a cold factor of 1.10. How the check works

  • Fits directly 0
  • With adapter 0
  • Special wiring 2
  • Unclear 2
  • Doesn't fit 7
Solar panels on the XT60 on DJI MPPT module input, sorted by status
Solar panelStatusConnectionQuantityCold margin
EcoFlow 110W Portable Solar Panel · 110 WSpecial wiring
  1. MC4
  2. XT60 adapter
  3. DJI Power Solar Panel Adapter Module (MPPT) XT60 input
  4. SDC port
up to 6sufficient
Renogy 100W 12V Flexible Monocrystalline · 100 WSpecial wiring
  1. MC4
  2. XT60 adapter
  3. DJI Power Solar Panel Adapter Module (MPPT) XT60 input
  4. SDC port
up to 6sufficient
Goal Zero Nomad 200 · 200 WUnclear
  1. Anderson
  2. XT60 third-party adapter
  3. DJI Power Solar Panel Adapter Module (MPPT) XT60 input
  4. SDC port
up to 1sufficient
Jackery SolarSaga 100 Air · 100 WUnclear–up to 1below 10%
LONGi Hi-MO 6 LR5-54HTH-430M · 430 WDoesn't fit–––
Anker SOLIX PS400 (A2437) · 400 WDoesn't fit–––
EcoFlow 400W Portable Solar Panel · 400 WDoesn't fit–––
EcoFlow NextGen 220W Bifacial Portable Solar Panel · 220 WDoesn't fit–––
Anker 531 Solar Panel 200W · 200 WDoesn't fit–––
BLUETTI PV200 · 200 WDoesn't fit–––
Jackery SolarSaga 200W (JS-200D) · 200 WDoesn't fit–––
Check notes per panel
EcoFlow 110W Portable Solar Panel

Voc 21.8V x1 = 21.8V; cold-adjusted 24.0V <= 30V. Isc 6.5A <= 10A.

Parallel only via adapter module(s): up to 3 panel(s) per module (<=400W), max 2 modules. Adapter module sold separately; parallel only.

dl.djicdn.com/downloads/DJI_Power_1000_Power_50… · dji.com/power-1000/faq · us.ecoflow.com/products/110w-portable-solar-pan…

Renogy 100W 12V Flexible Monocrystalline

Voc 24.4V x1 = 24.4V; cold-adjusted 26.8V <= 30V. Isc 5.16A <= 10A.

Parallel only via adapter module(s): up to 3 panel(s) per module (<=400W), max 2 modules. Adapter module sold separately; parallel only.

dl.djicdn.com/downloads/DJI_Power_1000_Power_50… · dji.com/power-1000/faq · renogy.com/100-watt-12-volt-flexible-monocrysta…

Goal Zero Nomad 200

Voc 23.0V x1 = 23.0V; cold-adjusted 25.3V <= 30V. Panel Isc unpublished; port-rated current bound 14A is not below DJI per-panel limit 10A, so compliance cannot be confirmed.

Parallel only via adapter module(s): up to 2 panel(s) per module (<=400W), max 2 modules. Adapter module sold separately; parallel only.

dl.djicdn.com/downloads/DJI_Power_1000_Power_50… · dji.com/power-1000/faq · goalzero.eu/en/product/goal-zero-nomad-200

Jackery SolarSaga 100 Air

STC Voc 29.7V is within 30V but cold-adjusted 32.7V exceeds it (<10% headroom). Isc 4.1A <= 10A.

Parallel only via adapter module(s): up to 3 panel(s) per module (<=400W), max 2 modules. Panel connector type not confirmed in sources; connector chain cannot be validated.

dl.djicdn.com/downloads/DJI_Power_1000_Power_50… · dji.com/power-1000/faq · jackery.com/products/jackery-explorer-1000-plus…

LONGi Hi-MO 6 LR5-54HTH-430M

DJI: each panel on one XT60 input must not exceed 200W.

dl.djicdn.com/downloads/DJI_Power_1000_Power_50… · dji.com/power-1000/faq

Anker SOLIX PS400 (A2437)

DJI: each panel on one XT60 input must not exceed 200W.

dl.djicdn.com/downloads/DJI_Power_1000_Power_50… · dji.com/power-1000/faq · service.ankersolix.com/product-description/a085… · ankersolix.com/products/400w-portable-solar-pan…

EcoFlow 400W Portable Solar Panel

DJI: each panel on one XT60 input must not exceed 200W.

dl.djicdn.com/downloads/DJI_Power_1000_Power_50… · dji.com/power-1000/faq · us.ecoflow.com/products/400w-portable-solar-pan…

EcoFlow NextGen 220W Bifacial Portable Solar Panel

DJI: each panel on one XT60 input must not exceed 200W.

dl.djicdn.com/downloads/DJI_Power_1000_Power_50… · dji.com/power-1000/faq · ca.ecoflow.com/products/220w-bifacial-portable-…

Anker 531 Solar Panel 200W

Vmp 48V (Voc unpublished, necessarily higher) x1 exceeds station max 30V.

dl.djicdn.com/downloads/DJI_Power_1000_Power_50… · dji.com/power-1000/faq · ankersolix.com/ca/products/a24321a1-free

BLUETTI PV200

Voc 26.1V x1 = 26.1V; cold-adjusted 28.7V <= 30V. Isc 10.3A not below DJI per-panel limit 10A (damage warning in manual).

dl.djicdn.com/downloads/DJI_Power_1000_Power_50… · dji.com/power-1000/faq · bluetti.com/wp-content/uploads/2024/07/PV200-Us… · bluettipower.eu/products/bluetti-sp200

Jackery SolarSaga 200W (JS-200D)

Voc 24.8V x1 = 24.8V; cold-adjusted 27.3V <= 30V. Isc 11.2A not below DJI per-panel limit 10A (damage warning in manual).

dl.djicdn.com/downloads/DJI_Power_1000_Power_50… · dji.com/power-1000/faq · manualslib.com/manual/3478346/Jackery-Solarsaga… · jackery.com/products/solarsaga-200w-solar-panel

Keep going with this station

Sources

Manufacturer pages and manuals take priority. Retailer listings appear only where no manufacturer source exists.

  1. Manufacturer dl.djicdn.com/downloads/DJI_Power_1000_Power_500/UM/20240411/DJ…
  2. Manufacturer dji.com/power-1000/faq
  3. Retailer listing adorama.com/DJIP1000K1.html
  4. Manufacturer dji.com/power-1000/specs
  5. Manufacturer store.dji.com/product/dji-power-solar-panel-adapter-module-mppt

Checked on