Power station · EcoFlow
EcoFlow RIVER 2 Pro
The EcoFlow RIVER 2 Pro stores 768 Wh and delivers 800 W continuous through its inverter. It accepts up to 220 W of solar via XT60. Of 11 checked solar panels, 1 fits directly and 3 with an adapter cable.
At a glance
- Covers the first 24 hours: CPAP overnight
- Not enough: Home blackout (only 9.3 of 24 hrs of use), Camping with cooler (only 8.3 of 24 hrs of use), Working from home (only 6.3 of 16 hrs of use), Job site (too weak), Fridge only (only 11.3 of 24 hrs of use)
Calculated with the simulator's starter profiles, no sun and no recharging. Calculate with your devices and solar: runtime simulator → · Details under “Runtime”
Key figures
- Capacity
- 768 Wh[1]
- Cell chemistry
- LFP (lithium iron phosphate)[3]
- Inverter continuous output
- 800 W[3]
- Surge output
- 1,600 W[3]
- Idle draw, AC on, no load
- not sourced
- Total solar input, max.
- 220 W[1]
- Weight
- 8.3 kg[3]
- Dimensions L × W × H
- 27 × 26 × 22.6 cm[3]
- AC charging (120 V)
- 940 W[3]
- Warranty (years)
- 5[3]
- Charge cycles
- 3,000 to 80%[3]
- AC outlets
- 4[3]
- USB-C
- 1 × up to 100 W[3]
- USB-A
- not sourced
- 12 V outputs
- 1[3]
Note: The manufacturer states 1600 W as surge; X-Boost also goes up to 1600 W[3]
Solar input
- Ports (XT60)
- 1[1]
- MPPT voltage range
- 11–50 V[1]
- Open-circuit voltage (Voc) max.
- 50 V[1]
- Input current max.
- 13 A[1]
- Solar power max.
- 220 W[1]
Restrictions per source
Manual: panel output voltage must be below 50V. Third-party retail pages list 11-60V; manual value (50V) used.
Connector per source: XT60 (manual: MC4-XT60 adapter cable, sold separately)
Runtime for typical uses
Calculated like the runtime simulator: typical scenario, no sun, full battery. Idle draw 12 W (estimate). Bars up to 72 hours.
Compatible solar panels
11 solar panels, each checked against this station's limits. Open-circuit voltage is multiplied by a cold factor of 1.10. How the check works
- Fits directly 1
- With adapter 3
- Special wiring 1
- Unclear 5
- Doesn't fit 1
| Solar panel | Status | Connection | Quantity | Cold margin |
|---|---|---|---|---|
| EcoFlow NextGen 220W Bifacial Portable Solar Panel · 220 W | Fits directly |
| up to 2, 1 recommended | sufficient |
| BLUETTI PV200 · 200 W | With adapter |
| up to 1 | sufficient |
| EcoFlow 110W Portable Solar Panel · 110 W | With adapter |
| up to 4, 2 recommended | sufficient |
| Renogy 100W 12V Flexible Monocrystalline · 100 W | With adapter |
| up to 2 | sufficient |
| Jackery SolarSaga 200W (JS-200D) · 200 W | Special wiring |
| up to 1 | sufficient |
| LONGi Hi-MO 6 LR5-54HTH-430M · 430 W | Unclear |
| up to 1 | sufficient |
| EcoFlow 400W Portable Solar Panel · 400 W | Unclear |
| up to 1 | below 10% |
| Anker 531 Solar Panel 200W · 200 W | Unclear |
| up to 1 | can't be checked |
| Goal Zero Nomad 200 · 200 W | Unclear |
| up to 1 | sufficient |
| Jackery SolarSaga 100 Air · 100 W | Unclear | – | up to 3 | sufficient |
| Anker SOLIX PS400 (A2437) · 400 W | Doesn't fit | – | – | – |
Check notes per panel
- EcoFlow NextGen 220W Bifacial Portable Solar Panel
Voc 21.5V x1 = 21.5V; cold-adjusted 23.7V <= 50V. Isc 12.4A <= 13A (allows 1 string(s) in parallel per port).
Max per port: 2 in series x 1 parallel string(s); ports: 1. 1 panel(s) already reach the 220W input cap.
Some third-party pages state 11-60V or 11-30V; official manual V1.0 states 11-50V 13A 220W.
websiteoss.ecoflow.com/cms/upload/2023/6/15/Eco… · ca.ecoflow.com/products/220w-bifacial-portable-…
- BLUETTI PV200
Voc 26.1V x1 = 26.1V; cold-adjusted 28.7V <= 50V. Isc 10.3A <= 13A (allows 1 string(s) in parallel per port).
Max per port: 1 in series x 1 parallel string(s); ports: 1. Use EcoFlow Solar-to-XT60/XT60i cable; community reports (not confirmed by EcoFlow) that plain XT60 limits current to ~8A on XT60i ports.
Some third-party pages state 11-60V or 11-30V; official manual V1.0 states 11-50V 13A 220W.
websiteoss.ecoflow.com/cms/upload/2023/6/15/Eco… · bluetti.com/wp-content/uploads/2024/07/PV200-Us… · bluettipower.eu/products/bluetti-sp200
- EcoFlow 110W Portable Solar Panel
Voc 21.8V x1 = 21.8V; cold-adjusted 24.0V <= 50V. Isc 6.5A <= 13A (allows 2 string(s) in parallel per port).
Max per port: 2 in series x 2 parallel string(s); ports: 1. 2 panel(s) already reach the 220W input cap. Use EcoFlow Solar-to-XT60/XT60i cable; community reports (not confirmed by EcoFlow) that plain XT60 limits current to ~8A on XT60i ports.
Some third-party pages state 11-60V or 11-30V; official manual V1.0 states 11-50V 13A 220W.
websiteoss.ecoflow.com/cms/upload/2023/6/15/Eco… · us.ecoflow.com/products/110w-portable-solar-pan…
- Renogy 100W 12V Flexible Monocrystalline
Voc 24.4V x1 = 24.4V; cold-adjusted 26.8V <= 50V. Isc 5.16A <= 13A (allows 2 string(s) in parallel per port).
Max per port: 1 in series x 2 parallel string(s); ports: 1. Use EcoFlow Solar-to-XT60/XT60i cable; community reports (not confirmed by EcoFlow) that plain XT60 limits current to ~8A on XT60i ports.
Some third-party pages state 11-60V or 11-30V; official manual V1.0 states 11-50V 13A 220W.
websiteoss.ecoflow.com/cms/upload/2023/6/15/Eco… · renogy.com/100-watt-12-volt-flexible-monocrysta…
- Jackery SolarSaga 200W (JS-200D)
Voc 24.8V x1 = 24.8V; cold-adjusted 27.3V <= 50V. Isc 11.2A <= 13A (allows 1 string(s) in parallel per port).
Max per port: 1 in series x 1 parallel string(s); ports: 1. Not manufacturer-documented; verify polarity with a multimeter before connecting.
Some third-party pages state 11-60V or 11-30V; official manual V1.0 states 11-50V 13A 220W.
websiteoss.ecoflow.com/cms/upload/2023/6/15/Eco… · manualslib.com/manual/3478346/Jackery-Solarsaga… · jackery.com/products/solarsaga-200w-solar-panel
- LONGi Hi-MO 6 LR5-54HTH-430M
Voc 39.13V x1 = 39.1V; cold-adjusted 43.0V <= 50V. Isc 14.15A exceeds 13A and manufacturer does not document current limiting for over-current panels.
Max per port: 1 in series x 1 parallel string(s); ports: 1. Panel rating 430W exceeds per-port limit 220W; input is clipped. Use EcoFlow Solar-to-XT60/XT60i cable; community reports (not confirmed by EcoFlow) that plain XT60 limits current to ~8A on XT60i ports.
Some third-party pages state 11-60V or 11-30V; official manual V1.0 states 11-50V 13A 220W.
- EcoFlow 400W Portable Solar Panel
STC Voc 48.0V is within 50V but cold-adjusted 52.8V exceeds it (<10% headroom). Isc 11A <= 13A (allows 1 string(s) in parallel per port).
Max per port: 1 in series x 1 parallel string(s); ports: 1. Panel rating 400W exceeds per-port limit 220W; input is clipped.
Some third-party pages state 11-60V or 11-30V; official manual V1.0 states 11-50V 13A 220W.
websiteoss.ecoflow.com/cms/upload/2023/6/15/Eco… · us.ecoflow.com/products/400w-portable-solar-pan…
- Anker 531 Solar Panel 200W
Voc not published; voltage limit cannot be verified. Imp (Isc unpublished) 4.17A <= 13A (allows 3 string(s) in parallel per port). Isc unpublished; parallel count uses Imp and is optimistic.
Max per port: 1 in series x 3 parallel string(s); ports: 1. XT60 plug into EcoFlow XT60/XT60i socket per EcoFlow cable naming.
Some third-party pages state 11-60V or 11-30V; official manual V1.0 states 11-50V 13A 220W.
websiteoss.ecoflow.com/cms/upload/2023/6/15/Eco… · ankersolix.com/ca/products/a24321a1-free
- Goal Zero Nomad 200
Voc 23.0V x1 = 23.0V; cold-adjusted 25.3V <= 50V. port-rated current bound 14A exceeds 13A and manufacturer does not document current limiting for over-current panels.
Max per port: 1 in series x 1 parallel string(s); ports: 1. Not manufacturer-documented; verify polarity.
Some third-party pages state 11-60V or 11-30V; official manual V1.0 states 11-50V 13A 220W.
websiteoss.ecoflow.com/cms/upload/2023/6/15/Eco… · goalzero.eu/en/product/goal-zero-nomad-200
- Jackery SolarSaga 100 Air
Voc 29.7V x1 = 29.7V; cold-adjusted 32.7V <= 50V. Isc 4.1A <= 13A (allows 3 string(s) in parallel per port).
Max per port: 1 in series x 3 parallel string(s); ports: 1. Panel connector type not confirmed in sources; connector chain cannot be validated.
Some third-party pages state 11-60V or 11-30V; official manual V1.0 states 11-50V 13A 220W.
websiteoss.ecoflow.com/cms/upload/2023/6/15/Eco… · jackery.com/products/jackery-explorer-1000-plus…
- Anker SOLIX PS400 (A2437)
Voc 57.6V x1 exceeds station max 50V.
Some third-party pages state 11-60V or 11-30V; official manual V1.0 states 11-50V 13A 220W.
websiteoss.ecoflow.com/cms/upload/2023/6/15/Eco… · service.ankersolix.com/product-description/a085… · ankersolix.com/products/400w-portable-solar-pan…
Keep going with this station
Sources
Manufacturer pages and manuals take priority. Retailer listings appear only where no manufacturer source exists.
- Manufacturer websiteoss.ecoflow.com/cms/upload/2023/6/15/EcoFlow_RIVER_2_Pro…
- Retailer listing adorama.com/ECOZMR620B.html
- Manufacturer us.ecoflow.com/products/river-2-pro-portable-power-station
Checked on