Power station · Jackery

Jackery Explorer 1000 v2

The Jackery Explorer 1000 v2 stores 1,070 Wh and delivers 1,500 W continuous through its inverter. It accepts up to 400 W of solar via DC8020. Of 11 checked solar panels, 1 fits directly and 6 with an adapter cable.

At a glance

  • Covers the first 24 hours: CPAP overnight
  • Not enough: Home blackout (only 12.1 of 24 hrs of use), Camping with cooler (only 14 of 24 hrs of use), Working from home (only 8.3 of 16 hrs of use), Job site (only 0.6 of 2.5 hrs of use), Fridge only (only 14.9 of 24 hrs of use)

Calculated with the simulator's starter profiles, no sun and no recharging. Calculate with your devices and solar: runtime simulator → · Details under “Runtime”

Key figures

Capacity
1,070 Wh[1, 2]
Cell chemistry
LFP (lithium iron phosphate)[3]
Inverter continuous output
1,500 W[3]
Surge output
3,000 W[3]
Idle draw, AC on, no load
not sourced
Total solar input, max.
400 W[1, 2]
Weight
10.8 kg[2]
Dimensions L × W × H
32.7 × 22.4 × 24.7 cm[2]
AC charging (120 V)
650 W[3]
Warranty (years)
3+2[2]
Charge cycles
4,000 to 70%[2]
AC outlets
3[2]
USB-C
2 × up to 100 W[2]
USB-A
1[2]
12 V outputs
1[2]

Note: AC charging standard 1.7 h, emergency charging mode about 1 h[3]

Solar input

Ports (DC8020)
2[1, 2]
MPPT voltage range
16–60 V[1, 2]
Open-circuit voltage (Voc) max.
60 V[1, 2]
Input current max.
10.5 A[1, 2]
Solar power max.
400 W (per port 200 W)[1, 2]
Restrictions per source

Jackery FAQ: ports are paralleled; 1, 2 or 4 identical panels only (3 not supported); max 2 panels per port; mixing wattages not supported.

Connector per source: 2x DC8020 (internally paralleled)

Runtime for typical uses

Calculated like the runtime simulator: typical scenario, no sun, full battery. Idle draw 15 W (estimate). Bars up to 72 hours.

Compatible solar panels

11 solar panels, each checked against this station's limits. Open-circuit voltage is multiplied by a cold factor of 1.10. How the check works

  • Fits directly 1
  • With adapter 6
  • Special wiring 1
  • Unclear 3
  • Doesn't fit 0
Solar panels on the DC8020 input, sorted by status
Solar panelStatusConnectionQuantityCold margin
Jackery SolarSaga 200W (JS-200D) · 200 Wrecommended by manufacturerFits directly
  1. DC8020 (panel cable)
  2. DC8020 input
up to 4, 2 recommendedsufficient
LONGi Hi-MO 6 LR5-54HTH-430M · 430 WWith adapter
  1. MC4
  2. DC8020 adapter
or
  1. MC4
  2. DC7909 + Jackery DC7909
  3. DC8020 adapter
up to 2, 1 recommendedsufficient
EcoFlow 400W Portable Solar Panel · 400 WWith adapter
  1. MC4
  2. DC8020 adapter
or
  1. MC4
  2. DC7909 + Jackery DC7909
  3. DC8020 adapter
up to 2, 1 recommendedsufficient
EcoFlow NextGen 220W Bifacial Portable Solar Panel · 220 WWith adapter
  1. MC4
  2. DC8020 adapter
or
  1. MC4
  2. DC7909 + Jackery DC7909
  3. DC8020 adapter
up to 4, 2 recommendedsufficient
BLUETTI PV200 · 200 WWith adapter
  1. MC4
  2. DC8020 adapter
or
  1. MC4
  2. DC7909 + Jackery DC7909
  3. DC8020 adapter
up to 4, 2 recommendedsufficient
EcoFlow 110W Portable Solar Panel · 110 WWith adapter
  1. MC4
  2. DC8020 adapter
or
  1. MC4
  2. DC7909 + Jackery DC7909
  3. DC8020 adapter
up to 4sufficient
Renogy 100W 12V Flexible Monocrystalline · 100 WWith adapter
  1. MC4
  2. DC8020 adapter
or
  1. MC4
  2. DC7909 + Jackery DC7909
  3. DC8020 adapter
up to 4sufficient
Goal Zero Nomad 200 · 200 WSpecial wiring
  1. Anderson
  2. DC8020 third-party adapter
up to 4, 2 recommendedsufficient
Anker SOLIX PS400 (A2437) · 400 WUnclear
  1. MC4
  2. DC8020 adapter
or
  1. MC4
  2. DC7909 + Jackery DC7909
  3. DC8020 adapter
up to 1below 10%
Anker 531 Solar Panel 200W · 200 WUnclear
  1. XT60
  2. DC8020 third-party adapter
up to 1can't be checked
Jackery SolarSaga 100 Air · 100 WUnclear–up to 4sufficient
Check notes per panel
Jackery SolarSaga 200W (JS-200D)

Voc 24.8V x1 = 24.8V; cold-adjusted 27.3V <= 60V. Isc 11.2A > 10.5A; station caps input current (manufacturer pairing). Output clipped to ~420W.

Max per port: 2 in series x 1 parallel string(s); ports: 2. 2 panel(s) already reach the 400W input cap.

faq.jackery.com/hc/en-us/articles/5230361515305… · jackery.com/products/jackery-explorer-1000-v2 · manualslib.com/manual/3478346/Jackery-Solarsaga… · jackery.com/products/solarsaga-200w-solar-panel

LONGi Hi-MO 6 LR5-54HTH-430M

Voc 39.13V x1 = 39.1V; cold-adjusted 43.0V <= 60V. Isc 14.15A > 10.5A; station caps input current (Jackery FAQ lists SolarSaga 200 (Isc 11.2A) as supported on the 10.5A port). Output clipped to ~345W.

Max per port: 1 in series x 1 parallel string(s); ports: 2. 1 panel(s) already reach the 400W input cap. Panel rating 430W exceeds per-port limit 200W; input is clipped. Do not plug a DC7909 plug directly into DC8020 (not interchangeable).

faq.jackery.com/hc/en-us/articles/5230361515305… · jackery.com/products/jackery-explorer-1000-v2

EcoFlow 400W Portable Solar Panel

Voc 48V x1 = 48.0V; cold-adjusted 52.8V <= 60V. Isc 11A > 10.5A; station caps input current (Jackery FAQ lists SolarSaga 200 (Isc 11.2A) as supported on the 10.5A port). Output clipped to ~430W.

Max per port: 1 in series x 1 parallel string(s); ports: 2. 1 panel(s) already reach the 400W input cap. Panel rating 400W exceeds per-port limit 200W; input is clipped. Do not plug a DC7909 plug directly into DC8020 (not interchangeable).

faq.jackery.com/hc/en-us/articles/5230361515305… · jackery.com/products/jackery-explorer-1000-v2 · us.ecoflow.com/products/400w-portable-solar-pan…

EcoFlow NextGen 220W Bifacial Portable Solar Panel

Voc 21.5V x1 = 21.5V; cold-adjusted 23.7V <= 60V. Isc 12.4A > 10.5A; station caps input current (Jackery FAQ lists SolarSaga 200 (Isc 11.2A) as supported on the 10.5A port). Output clipped to ~386W.

Max per port: 2 in series x 1 parallel string(s); ports: 2. 2 panel(s) already reach the 400W input cap. Panel rating 220W exceeds per-port limit 200W; input is clipped. Do not plug a DC7909 plug directly into DC8020 (not interchangeable).

faq.jackery.com/hc/en-us/articles/5230361515305… · jackery.com/products/jackery-explorer-1000-v2 · ca.ecoflow.com/products/220w-bifacial-portable-…

BLUETTI PV200

Voc 26.1V x1 = 26.1V; cold-adjusted 28.7V <= 60V. Isc 10.3A <= 10.5A (allows 1 string(s) in parallel per port).

Max per port: 2 in series x 1 parallel string(s); ports: 2. 2 panel(s) already reach the 400W input cap. Do not plug a DC7909 plug directly into DC8020 (not interchangeable).

faq.jackery.com/hc/en-us/articles/5230361515305… · jackery.com/products/jackery-explorer-1000-v2 · bluetti.com/wp-content/uploads/2024/07/PV200-Us… · bluettipower.eu/products/bluetti-sp200

EcoFlow 110W Portable Solar Panel

Voc 21.8V x1 = 21.8V; cold-adjusted 24.0V <= 60V. Isc 6.5A <= 10.5A (allows 1 string(s) in parallel per port).

Max per port: 2 in series x 1 parallel string(s); ports: 2. Do not plug a DC7909 plug directly into DC8020 (not interchangeable).

faq.jackery.com/hc/en-us/articles/5230361515305… · jackery.com/products/jackery-explorer-1000-v2 · us.ecoflow.com/products/110w-portable-solar-pan…

Renogy 100W 12V Flexible Monocrystalline

Voc 24.4V x1 = 24.4V; cold-adjusted 26.8V <= 60V. Isc 5.16A <= 10.5A (allows 2 string(s) in parallel per port).

Max per port: 2 in series x 2 parallel string(s); ports: 2. Do not plug a DC7909 plug directly into DC8020 (not interchangeable).

faq.jackery.com/hc/en-us/articles/5230361515305… · jackery.com/products/jackery-explorer-1000-v2 · renogy.com/100-watt-12-volt-flexible-monocrysta…

Goal Zero Nomad 200

Voc 23.0V x1 = 23.0V; cold-adjusted 25.3V <= 60V. port-rated current bound 14A > 10.5A; station caps input current (Jackery FAQ lists SolarSaga 200 (Isc 11.2A) as supported on the 10.5A port). Output clipped to ~401W.

Max per port: 2 in series x 1 parallel string(s); ports: 2. 2 panel(s) already reach the 400W input cap. Not manufacturer-documented; verify polarity.

faq.jackery.com/hc/en-us/articles/5230361515305… · jackery.com/products/jackery-explorer-1000-v2 · goalzero.eu/en/product/goal-zero-nomad-200

Anker SOLIX PS400 (A2437)

STC Voc 57.6V is within 60V but cold-adjusted 63.4V exceeds it (<10% headroom). Isc 8.75A <= 10.5A (allows 1 string(s) in parallel per port).

Max per port: 1 in series x 1 parallel string(s); ports: 2. Panel rating 400W exceeds per-port limit 200W; input is clipped. Do not plug a DC7909 plug directly into DC8020 (not interchangeable).

faq.jackery.com/hc/en-us/articles/5230361515305… · jackery.com/products/jackery-explorer-1000-v2 · service.ankersolix.com/product-description/a085… · ankersolix.com/products/400w-portable-solar-pan…

Anker 531 Solar Panel 200W

Voc not published; voltage limit cannot be verified. Imp (Isc unpublished) 4.17A <= 10.5A (allows 2 string(s) in parallel per port). Isc unpublished; parallel count uses Imp and is optimistic.

Max per port: 1 in series x 2 parallel string(s); ports: 2. Not manufacturer-documented; verify polarity.

faq.jackery.com/hc/en-us/articles/5230361515305… · jackery.com/products/jackery-explorer-1000-v2 · ankersolix.com/ca/products/a24321a1-free

Jackery SolarSaga 100 Air

Voc 29.7V x1 = 29.7V; cold-adjusted 32.7V <= 60V. Isc 4.1A <= 10.5A (allows 2 string(s) in parallel per port).

Max per port: 1 in series x 2 parallel string(s); ports: 2. Panel connector type not confirmed in sources; connector chain cannot be validated.

faq.jackery.com/hc/en-us/articles/5230361515305… · jackery.com/products/jackery-explorer-1000-v2 · jackery.com/products/jackery-explorer-1000-plus…

Keep going with this station

Sources

Manufacturer pages and manuals take priority. Retailer listings appear only where no manufacturer source exists.

  1. Manufacturer faq.jackery.com/hc/en-us/articles/52303615153051-Explorer-1000-…
  2. Manufacturer jackery.com/products/jackery-explorer-1000-v2
  3. Retailer listing arnoldclarkautoparts.com/products/jackery-explorer-1000-v2-port…

Checked on