Power station · Zendure

Zendure SuperBase Pro 2000

The Zendure SuperBase Pro 2000 stores 2,096 Wh and delivers 2,000 W continuous through its inverter. It accepts up to 2,400 W of solar via XT60 + AC inlet (PVMax). Of 11 checked solar panels, 5 fit directly and 0 with an adapter cable.

At a glance

  • Covers the first 24 hours: Camping with cooler, Working from home, CPAP overnight
  • Not enough: Home blackout (only 19.9 of 24 hrs of use), Fridge only (only 23.4 of 24 hrs of use)
  • Unclear: Job site (startup unclear)

Calculated with the simulator's starter profiles, no sun and no recharging. Calculate with your devices and solar: runtime simulator → · Details under “Runtime”

Key figures

Capacity
2,096 Wh[1, 2, 3]
Cell chemistry
NMC (lithium nickel manganese cobalt oxide)[4]
Inverter continuous output
2,000 W[4]
Boost for heating loads (not a startup rating)
3,000 W[2]
Idle draw, AC on, no load
not sourced
Total solar input, max.
2,400 W[1, 3]
Weight
21.2 kg[2]
Dimensions L × W × H
44.6 × 27.6 × 35.2 cm[2]
AC charging (120 V)
1,800 W[4]
Warranty (years)
2[2]
Charge cycles
3,000 to 60%[2]
AC outlets
6[2]
USB-C
4 × up to 100 W[2]
USB-A
2[2]
12 V outputs
1[2]

Note: XT60 600 W, 1800 W only with high-voltage panels; US clearance; 3000 W is AmpUp (voltage reduction), no real surge rating is documented by the manufacturer[4, 2]

Solar input

XT60 input

Ports
1[1, 2]
MPPT voltage range
12–60 V[1, 2]
Open-circuit voltage (Voc) max.
75 V[1, 2]
Input current max.
11 A[1, 2]
Solar power max.
600 W[1, 2]
Restrictions per source

12-60Vmp, Voc must stay within 75V, 600W. Manual solar section states 12-160Vmp, 11A max for solar input without splitting per port; 11A applied to XT60 (interpretation).

Connector per source: XT60 (MC4-to-XT60 3m cable included)

AC inlet (PVMax) input

Ports
1[1, 3]
MPPT voltage range
60–160 V[1, 3]
Open-circuit voltage (Voc) max.
200 V[1, 3]
Input current max.
11 A[1, 3]
Solar power max.
1,800 W[1, 3]
Restrictions per source

60-160Vmp, Voc within 200V, 11A, 1800W. Requires series strings; can run in parallel with the XT60 input (2400W total).

Connector per source: AC inlet used as PV input via Zendure MC4-to-AC cable (included)

Runtime for typical uses

Calculated like the runtime simulator: typical scenario, no sun, full battery. Idle draw 22 W (estimate). Bars up to 72 hours.

Compatible solar panels

11 solar panels, each checked against this station's limits. Open-circuit voltage is multiplied by a cold factor of 1.10. How the check works

XT60 input

  • Fits directly 5
  • With adapter 0
  • Special wiring 0
  • Unclear 6
  • Doesn't fit 0
Solar panels on the XT60 input, sorted by status
Solar panelStatusConnectionQuantityCold margin
Anker SOLIX PS400 (A2437) · 400 WFits directly
  1. MC4
  2. XT60 (cable included with station)
up to 1sufficient
EcoFlow 400W Portable Solar Panel · 400 WFits directly
  1. MC4
  2. XT60 (cable included with station)
up to 1sufficient
BLUETTI PV200 · 200 WFits directly
  1. MC4
  2. XT60 (cable included with station)
up to 2sufficient
EcoFlow 110W Portable Solar Panel · 110 WFits directly
  1. MC4
  2. XT60 (cable included with station)
up to 3sufficient
Renogy 100W 12V Flexible Monocrystalline · 100 WFits directly
  1. MC4
  2. XT60 (cable included with station)
up to 4sufficient
LONGi Hi-MO 6 LR5-54HTH-430M · 430 WUnclear
  1. MC4
  2. XT60 (cable included with station)
up to 1sufficient
EcoFlow NextGen 220W Bifacial Portable Solar Panel · 220 WUnclear
  1. MC4
  2. XT60 (cable included with station)
up to 1sufficient
Anker 531 Solar Panel 200W · 200 WUnclear
  1. XT60 (panel)
  2. XT60 input
up to 1can't be checked
Goal Zero Nomad 200 · 200 WUnclear
  1. Anderson Powerpole (HPP)
  2. XT60 third-party adapter
up to 1sufficient
Jackery SolarSaga 200W (JS-200D) · 200 WUnclear
  1. DC8020
  2. MC4
or
  1. DC8020
  2. XT60 third-party adapter
up to 1sufficient
Jackery SolarSaga 100 Air · 100 WUnclear–up to 4sufficient

AC inlet (PVMax) input

  • Fits directly 0
  • With adapter 0
  • Special wiring 5
  • Unclear 6
  • Doesn't fit 0
Solar panels on the AC inlet (PVMax) input, sorted by status
Solar panelStatusConnectionQuantityCold margin
Anker SOLIX PS400 (A2437) · 400 WSpecial wiring
  1. Series string (MC4)
  2. Zendure MC4-to-AC cable (included)
  3. AC inlet (PVMax)
up to 3sufficient
EcoFlow 400W Portable Solar Panel · 400 WSpecial wiring
  1. Series string (MC4)
  2. Zendure MC4-to-AC cable (included)
  3. AC inlet (PVMax)
up to 3sufficient
BLUETTI PV200 · 200 WSpecial wiring
  1. Series string (MC4)
  2. Zendure MC4-to-AC cable (included)
  3. AC inlet (PVMax)
up to 6sufficient
EcoFlow 110W Portable Solar Panel · 110 WSpecial wiring
  1. Series string (MC4)
  2. Zendure MC4-to-AC cable (included)
  3. AC inlet (PVMax)
up to 8sufficient
Renogy 100W 12V Flexible Monocrystalline · 100 WSpecial wiring
  1. Series string (MC4)
  2. Zendure MC4-to-AC cable (included)
  3. AC inlet (PVMax)
up to 14sufficient
LONGi Hi-MO 6 LR5-54HTH-430M · 430 WUnclear
  1. Series string (MC4)
  2. Zendure MC4-to-AC cable (included)
  3. AC inlet (PVMax)
up to 1sufficient
EcoFlow NextGen 220W Bifacial Portable Solar Panel · 220 WUnclear
  1. Series string (MC4)
  2. Zendure MC4-to-AC cable (included)
  3. AC inlet (PVMax)
up to 1sufficient
Anker 531 Solar Panel 200W · 200 WUnclear
  1. XT60
  2. MC4 third-party adapters
  3. series string
  4. Zendure MC4-to-AC cable
up to 1can't be checked
Goal Zero Nomad 200 · 200 WUnclear
  1. HPP
  2. MC4 third-party adapters
  3. series string
  4. Zendure MC4-to-AC cable
up to 1sufficient
Jackery SolarSaga 200W (JS-200D) · 200 WUnclear
  1. DC8020
  2. MC4 third-party adapters
  3. series string
  4. Zendure MC4-to-AC cable
up to 1sufficient
Jackery SolarSaga 100 Air · 100 WUnclear–up to 12sufficient
Check notes per panel
Anker SOLIX PS400 (A2437) (XT60)

Voc 57.6V x1 = 57.6V; cold-adjusted 63.4V <= 75V. Isc 8.75A <= 11A (allows 1 string(s) in parallel per port).

Max per port: 1 in series x 1 parallel string(s); ports: 1.

zendure.com/pages/superbase-pro-2000-us-user-ma… · zendure.com/products/superbase-pro-2000 · service.ankersolix.com/product-description/a085… · ankersolix.com/products/400w-portable-solar-pan…

EcoFlow 400W Portable Solar Panel (XT60)

Voc 48V x1 = 48.0V; cold-adjusted 52.8V <= 75V. Isc 11A <= 11A (allows 1 string(s) in parallel per port).

Max per port: 1 in series x 1 parallel string(s); ports: 1.

zendure.com/pages/superbase-pro-2000-us-user-ma… · zendure.com/products/superbase-pro-2000 · us.ecoflow.com/products/400w-portable-solar-pan…

BLUETTI PV200 (XT60)

Voc 26.1V x1 = 26.1V; cold-adjusted 28.7V <= 75V. Isc 10.3A <= 11A (allows 1 string(s) in parallel per port).

Max per port: 2 in series x 1 parallel string(s); ports: 1.

zendure.com/pages/superbase-pro-2000-us-user-ma… · zendure.com/products/superbase-pro-2000 · bluetti.com/wp-content/uploads/2024/07/PV200-Us… · bluettipower.eu/products/bluetti-sp200

EcoFlow 110W Portable Solar Panel (XT60)

Voc 21.8V x1 = 21.8V; cold-adjusted 24.0V <= 75V. Isc 6.5A <= 11A (allows 1 string(s) in parallel per port).

Max per port: 3 in series x 1 parallel string(s); ports: 1.

zendure.com/pages/superbase-pro-2000-us-user-ma… · zendure.com/products/superbase-pro-2000 · us.ecoflow.com/products/110w-portable-solar-pan…

Renogy 100W 12V Flexible Monocrystalline (XT60)

Voc 24.4V x1 = 24.4V; cold-adjusted 26.8V <= 75V. Isc 5.16A <= 11A (allows 2 string(s) in parallel per port).

Max per port: 2 in series x 2 parallel string(s); ports: 1.

zendure.com/pages/superbase-pro-2000-us-user-ma… · zendure.com/products/superbase-pro-2000 · renogy.com/100-watt-12-volt-flexible-monocrysta…

LONGi Hi-MO 6 LR5-54HTH-430M (XT60)

Voc 39.13V x1 = 39.1V; cold-adjusted 43.0V <= 75V. Isc 14.15A exceeds 11A and manufacturer does not document current limiting for over-current panels.

Max per port: 1 in series x 1 parallel string(s); ports: 1.

zendure.com/pages/superbase-pro-2000-us-user-ma… · zendure.com/products/superbase-pro-2000

EcoFlow NextGen 220W Bifacial Portable Solar Panel (XT60)

Voc 21.5V x1 = 21.5V; cold-adjusted 23.7V <= 75V. Isc 12.4A exceeds 11A and manufacturer does not document current limiting for over-current panels.

Max per port: 3 in series x 1 parallel string(s); ports: 1.

zendure.com/pages/superbase-pro-2000-us-user-ma… · zendure.com/products/superbase-pro-2000 · ca.ecoflow.com/products/220w-bifacial-portable-…

Anker 531 Solar Panel 200W (XT60)

Voc not published; voltage limit cannot be verified. Imp (Isc unpublished) 4.17A <= 11A (allows 2 string(s) in parallel per port). Isc unpublished; parallel count uses Imp and is optimistic.

Max per port: 1 in series x 2 parallel string(s); ports: 1.

zendure.com/pages/superbase-pro-2000-us-user-ma… · zendure.com/products/superbase-pro-2000 · ankersolix.com/ca/products/a24321a1-free

Goal Zero Nomad 200 (XT60)

Voc 23.0V x1 = 23.0V; cold-adjusted 25.3V <= 75V. port-rated current bound 14A exceeds 11A and manufacturer does not document current limiting for over-current panels.

Max per port: 2 in series x 1 parallel string(s); ports: 1. Not manufacturer-documented; verify polarity.

zendure.com/pages/superbase-pro-2000-us-user-ma… · zendure.com/products/superbase-pro-2000 · goalzero.eu/en/product/goal-zero-nomad-200

Jackery SolarSaga 200W (JS-200D) (XT60)

Voc 24.8V x1 = 24.8V; cold-adjusted 27.3V <= 75V. Isc 11.2A exceeds 11A and manufacturer does not document current limiting for over-current panels.

Max per port: 2 in series x 1 parallel string(s); ports: 1. Not manufacturer-documented; verify polarity with a multimeter before connecting.

zendure.com/pages/superbase-pro-2000-us-user-ma… · zendure.com/products/superbase-pro-2000 · manualslib.com/manual/3478346/Jackery-Solarsaga… · jackery.com/products/solarsaga-200w-solar-panel

Jackery SolarSaga 100 Air (XT60)

Voc 29.7V x1 = 29.7V; cold-adjusted 32.7V <= 75V. Isc 4.1A <= 11A (allows 2 string(s) in parallel per port).

Max per port: 2 in series x 2 parallel string(s); ports: 1. Panel connector type not confirmed in sources; connector chain cannot be validated.

zendure.com/pages/superbase-pro-2000-us-user-ma… · zendure.com/products/superbase-pro-2000 · jackery.com/products/jackery-explorer-1000-plus…

Anker SOLIX PS400 (A2437) (AC inlet (PVMax))

Voc 57.6V x2 = 115.2V; cold-adjusted 126.7V <= 200V. Isc 8.75A <= 11A (allows 1 string(s) in parallel per port).

Max per port: 3 in series x 1 parallel string(s); ports: 1. Minimum 2 panels in series required to reach 60V MPPT minimum. Minimum 60Vmp requires series string.

zendure.com/pages/superbase-pro-2000-us-user-ma… · manuals.plus/zendure/zdsbp2000-superbase-pro-20… · service.ankersolix.com/product-description/a085… · ankersolix.com/products/400w-portable-solar-pan…

EcoFlow 400W Portable Solar Panel (AC inlet (PVMax))

Voc 48V x2 = 96.0V; cold-adjusted 105.6V <= 200V. Isc 11A <= 11A (allows 1 string(s) in parallel per port).

Max per port: 3 in series x 1 parallel string(s); ports: 1. Minimum 2 panels in series required to reach 60V MPPT minimum. Minimum 60Vmp requires series string.

zendure.com/pages/superbase-pro-2000-us-user-ma… · manuals.plus/zendure/zdsbp2000-superbase-pro-20… · us.ecoflow.com/products/400w-portable-solar-pan…

BLUETTI PV200 (AC inlet (PVMax))

Voc 26.1V x3 = 78.3V; cold-adjusted 86.1V <= 200V. Isc 10.3A <= 11A (allows 1 string(s) in parallel per port).

Max per port: 6 in series x 1 parallel string(s); ports: 1. Minimum 3 panels in series required to reach 60V MPPT minimum. Minimum 60Vmp requires series string.

zendure.com/pages/superbase-pro-2000-us-user-ma… · manuals.plus/zendure/zdsbp2000-superbase-pro-20… · bluetti.com/wp-content/uploads/2024/07/PV200-Us… · bluettipower.eu/products/bluetti-sp200

EcoFlow 110W Portable Solar Panel (AC inlet (PVMax))

Voc 21.8V x4 = 87.2V; cold-adjusted 95.9V <= 200V. Isc 6.5A <= 11A (allows 1 string(s) in parallel per port).

Max per port: 8 in series x 1 parallel string(s); ports: 1. Minimum 4 panels in series required to reach 60V MPPT minimum. Minimum 60Vmp requires series string.

zendure.com/pages/superbase-pro-2000-us-user-ma… · manuals.plus/zendure/zdsbp2000-superbase-pro-20… · us.ecoflow.com/products/110w-portable-solar-pan…

Renogy 100W 12V Flexible Monocrystalline (AC inlet (PVMax))

Voc 24.4V x3 = 73.2V; cold-adjusted 80.5V <= 200V. Isc 5.16A <= 11A (allows 2 string(s) in parallel per port).

Max per port: 7 in series x 2 parallel string(s); ports: 1. Minimum 3 panels in series required to reach 60V MPPT minimum. Minimum 60Vmp requires series string.

zendure.com/pages/superbase-pro-2000-us-user-ma… · manuals.plus/zendure/zdsbp2000-superbase-pro-20… · renogy.com/100-watt-12-volt-flexible-monocrysta…

LONGi Hi-MO 6 LR5-54HTH-430M (AC inlet (PVMax))

Voc 39.13V x2 = 78.3V; cold-adjusted 86.1V <= 200V. Isc 14.15A exceeds 11A and manufacturer does not document current limiting for over-current panels.

Max per port: 4 in series x 1 parallel string(s); ports: 1. Minimum 2 panels in series required to reach 60V MPPT minimum. Minimum 60Vmp requires series string.

zendure.com/pages/superbase-pro-2000-us-user-ma… · manuals.plus/zendure/zdsbp2000-superbase-pro-20…

EcoFlow NextGen 220W Bifacial Portable Solar Panel (AC inlet (PVMax))

Voc 21.5V x4 = 86.0V; cold-adjusted 94.6V <= 200V. Isc 12.4A exceeds 11A and manufacturer does not document current limiting for over-current panels.

Max per port: 8 in series x 1 parallel string(s); ports: 1. Minimum 4 panels in series required to reach 60V MPPT minimum. Minimum 60Vmp requires series string.

zendure.com/pages/superbase-pro-2000-us-user-ma… · manuals.plus/zendure/zdsbp2000-superbase-pro-20… · ca.ecoflow.com/products/220w-bifacial-portable-…

Anker 531 Solar Panel 200W (AC inlet (PVMax))

Voc not published; voltage limit cannot be verified. Imp (Isc unpublished) 4.17A <= 11A (allows 2 string(s) in parallel per port). Isc unpublished; parallel count uses Imp and is optimistic.

Max per port: 1 in series x 2 parallel string(s); ports: 1. Minimum 2 panels in series required to reach 60V MPPT minimum. Not manufacturer-documented.

zendure.com/pages/superbase-pro-2000-us-user-ma… · manuals.plus/zendure/zdsbp2000-superbase-pro-20… · ankersolix.com/ca/products/a24321a1-free

Goal Zero Nomad 200 (AC inlet (PVMax))

Voc 23.0V x4 = 92.0V; cold-adjusted 101.2V <= 200V. port-rated current bound 14A exceeds 11A and manufacturer does not document current limiting for over-current panels.

Max per port: 7 in series x 1 parallel string(s); ports: 1. Minimum 4 panels in series required to reach 60V MPPT minimum. Not manufacturer-documented.

zendure.com/pages/superbase-pro-2000-us-user-ma… · manuals.plus/zendure/zdsbp2000-superbase-pro-20… · goalzero.eu/en/product/goal-zero-nomad-200

Jackery SolarSaga 200W (JS-200D) (AC inlet (PVMax))

Voc 24.8V x3 = 74.4V; cold-adjusted 81.8V <= 200V. Isc 11.2A exceeds 11A and manufacturer does not document current limiting for over-current panels.

Max per port: 7 in series x 1 parallel string(s); ports: 1. Minimum 3 panels in series required to reach 60V MPPT minimum. Not manufacturer-documented.

zendure.com/pages/superbase-pro-2000-us-user-ma… · manuals.plus/zendure/zdsbp2000-superbase-pro-20… · manualslib.com/manual/3478346/Jackery-Solarsaga… · jackery.com/products/solarsaga-200w-solar-panel

Jackery SolarSaga 100 Air (AC inlet (PVMax))

Voc 29.7V x3 = 89.1V; cold-adjusted 98.0V <= 200V. Isc 4.1A <= 11A (allows 2 string(s) in parallel per port).

Max per port: 6 in series x 2 parallel string(s); ports: 1. Minimum 3 panels in series required to reach 60V MPPT minimum. Panel connector type not confirmed in sources; connector chain cannot be validated.

zendure.com/pages/superbase-pro-2000-us-user-ma… · manuals.plus/zendure/zdsbp2000-superbase-pro-20… · jackery.com/products/jackery-explorer-1000-plus…

Keep going with this station

Sources

Manufacturer pages and manuals take priority. Retailer listings appear only where no manufacturer source exists.

  1. Manufacturer zendure.com/pages/superbase-pro-2000-us-user-manual-english
  2. Manufacturer zendure.com/products/superbase-pro-2000
  3. Manufacturer manual, third-party host manuals.plus/zendure/zdsbp2000-superbase-pro-2000-portable-powe…
  4. Retailer listing adorama.com/znzdsbp2bkus.html

Checked on